Bruno Marcio, bruno.marcio@bol.com.br
- This is a single-side PCB version of Easy-Downloadv2.0 , instead you design the double-sided original board,you can make this version without difficulty!
- The picture's board was manufactured by an industry, but you can make it yourself using a plotter, Silk-screen or other method what you think better.
Figure 1: Bottom View of PCB Pattern for EasyDownloader V 2.0 (the full size is 87x 103 mm)
- Figure 2: Component placement layout(top view), be careful with the polarity of electrolytic capacitors. Everycomponents labeled with " J " ( J1, J2, etc...) is a jumper.
- The board was designed with ACCEL TANGO PCB Plus V2.2 (forDOS):TG.ZIP
Uncompressed this file in C:\TG directory. If the program don't
work correctly, you'll to configure the sch.ini and pcb.ini file
with DOS-EDIT or WIN-Notepad and put the correct
directories in the text line..
Single-side TANGO PCB file : prog89.zip
- I made a small modification in the circuit, see it at new schematic: prog89.gif
I suggest that builds starting from the Tango's format, for being of better quality.
If you have a problem, comment, bug report, or suggestion please contactme via e-mail address shown above.
